Radiator Recycling Plant

Introduction of Radiator Recycling Plant

The radiator recycling plant is specially designed for crushing scrap air conditioning radiator and then separate copper, aluminum and iron for recycling. Having high automation and high efficiency, this radiator crushing machine is quite suitable for recycling a large number of scrap radiators.

Advantages of Radiator Recycling Plant

* Adopt an electric control cabinet to control the whole system.
* High efficiency, saving labor and cost.
* The separating rate can reach 99.8%.
* Adopt cyclone dust collector, no pollution to the environment.
* Low noise, the noise is not more than 85db.
* The voltage can be customized as per your requirements.

Main Equipment of Radiator Crusher and Separator

The radiator recycling line consists of the following equipment:

1. Belt Conveyor

to connect the whole line and convey scrap radiators to the crusher.
Dimension: 3000*1400*2500mm
Voltage/Power: 380V/2.2kw

2. First Crusher (Double-shaft Crusher)

To cut radiators into 10-20mm length, then the crushed material is transported by the conveyor belt to the second crusher.
Dimension: 1100*1800*1960mm
Voltage/Power: 380V/22kw

3. Belt Conveyor

To transfer the first crushed materials for the second crushing.
Dimension: 3300*1100*2500mm
Voltage/Power: 380V/2.2kw
The material will not fall down from the conveyor. Loading capacity: 1000kg/h.

4. Second Crusher

After transported to this crusher, the 10-20mm material is shredded by this crusher to smaller pieces.
Dimension: 1700*1550*2900mm
Voltage/Power: 380V/55kWw

5. Magnetic Separator

To separate iron from the crushed mixture, so that copper and aluminum can be separated easily.
Dimension: 3500*1500*2100mm
Voltage/Power: 380V/1.5kw

6. Vibrating Separator

To separate copper pieces from aluminum pieces based on their different specific gravity.
Dimensions: 3800*2000*4000mm
Voltage/Power: 380V/17kw
Technical Parameters of Radiator Crushing Plant

Note:
1. The blades of the crushers are made of special tool steel.
2. Check to grind the blades of the first crusher every 60 working days. We provide an additional set of blades for free.
3. Check to grind the blades of the second crusher every 30 working days.